<button id="rh9lh"><acronym id="rh9lh"><menuitem id="rh9lh"></menuitem></acronym></button>
  • <span id="rh9lh"></span>

    
    
    <tbody id="rh9lh"></tbody>
    <tbody id="rh9lh"><pre id="rh9lh"></pre></tbody>
        1. <tbody id="rh9lh"><pre id="rh9lh"></pre></tbody>
        2. 加入收藏設為首頁聯系我們

          歡迎光臨廣州市通駿機械設備有限公司官方網站!

          信譽第一,質量至上注重工作細節,提高服務品質

          全國24小時服務熱線 :
          400-7728-317

          當前位置:首頁 > 產品展示 > 氣動點(凸)焊 > TMF系列中頻逆變直流點(凸)焊機

          ?

          產品詳細

          中頻逆變直流點焊機
          發布者: 發布日期:2018-10-20 16:43:47
          TMF系列中頻逆變直流(凸)焊機
          TMF Series Medium Frequency Inverter DC Spot welding Machine
          特點及用途
          1、通電時間短、熱效率高、可有效抑制焊接飛濺、獲得穩定高品質的焊接效果,焊接成型美觀。
          2、控制精度高,中頻點焊機由于工作頻率高(通常在1-4KHz),使得反饋控制精度是一般交流點凸 焊機和次級整流點凸焊機的20-80倍,相應的輸出控制精度也非常高。
          3、逆變點焊機采用三相輸入,宜于電網供電平衡,無須電力補償設備,對電網無干擾。
          4、由于熱效率高、焊接變壓器小、鐵損小,焊接同樣的工件比交流點焊機和次級整流點焊機節能可達30%以上。
          5、特別適合于導電率較高的銅、鋁和鍍鋅金屬等材料,焊接效果良好,尤其適合于三層板焊接、非常薄的材料的焊接以及精密焊接的要求。
          Main Features:
          1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming
          2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.
          3.Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids
          4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%
          5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding
           
          主要技術參數 Main Technical Parameter
           
          參數/型號
          Parameter/model
          TMF-50KVA TMF-90KVA TMF-150KVA TMF-170KVA TMF-250KVA TMF-300KVA
          額定電源
          Rated/Voltage
          3相,交流電(AC),380------415-----480V,50/60HZ
          額定容量
          Rated/Capacity
          50KVA 90KVA 150KVA 170KVA 250KVA 300KVA
          額定占截率
          Rated Duty Cycle
          50% 50% 50% 50% 50% 50%
          最大焊接電流
          Max Welding Current
          18500A 23500A 32000A 40500A 56500A 80000A
          電極行程
          Electrode Stroket
          75MM 100MM
          電極臂間距
          Welding Arm Spacing
          260MM 320MM
          氣源壓力
          Air Source Pressure
          0.6MPa
          冷卻水流量
          Cooling Water Flow
          16L/Minute 25L/Minute 35L/Minute 45L/Minute

          想要了解更多關于自動閃光對焊機的信息,請點擊:http://www.qzlangong.com
          上一篇:中頻逆變直流點焊機
          下一篇:返回列表
          久久免费视频,日本一道本,国产a级毛片,2020人妻中文字幕在线乱码,日本特黄特黄刺激大片